PrepMate qwikSet Kit - Stainless Steel
Metro's PrepMate qwikSet Kit multifunctional workstation is designed around the operator to eliminate space contraints and increase overall productivity. Perform tasks faster and easier in a space saving footprint with a patent pending, multi-level work surface. Tall or short, you can get cofmortable and be more productive in second with the qwikSet easy height adjustment.
- Multi-Level: The PrepMate Multi-Rail design holds a standard 18" x 24" cutting board above standard food/steam table pans to increase work surface capacity by providing an easily accessible level of storage below the work surface. Get an increase in productivity up to 20% by allowing prepared food to be pushed into pans without the wasted time and motion to pick-up and place into pans.
- qwikSet Height Adjustment: Capable of 5 work surface heights (35-18" - 39-1/8"). The work station can be quickly adjusted for a variety of employee heights and tasks.
- Mobile & Stable: Perform tasks in multiple locations and save time and labor transporting product. Four total-lock casters provide a stable work surface by locking both the caster wheel and the hub for maximum stability.
This qwikSet Kit includes stainless steel posts and solid shelves and the following accessories: (2) Magic Rings, (1) 18" x 24" x .5" White HDPE Cutting Board, Cutting Board Holder, Pan Holder and Knife Holder. Additional PrepMate Accessories are available and must be ordered separately.
Please select from the following models:
- MSQ1830-FSFS-PK2, nominal size: 18" x 30", actual: 19.4" x 32" (493x812mm)
- MSQ1836-FSFS-PK2, nominal size: 18" x 36", actual: 19.4" x 38" (493x914mm)
- MSQ1848-FSFS-PK2, nominal size: 18" x 48", actual: 19.4" x 50" (493x1270mm)
Load Rating: Multi-Rails: 800lbs (363kg) per set*; Shelving: 800lbs (363kg) each; Casters: 220lbs each (100kg); Static System: 800lbs (363kg).
*Multi-Rails are capable of holding 800lbs evenly distributed on an 18" x 24" work surface of sufficient strength centered in the unit.
For product specification sheet 17.51, click here.
For special configurations, please contact our office.